Various nozzles are optional, can be used in different situations and environment for different products.
Small and exquisite , easy to carry and move, save the space
Can be In-Line installed in customer’s production line, reduce the investment cost
Mainly applied to phone shells’ printing, coating, gluing in electronics industry; cleaning of phone screen surface; cleaning of aerospace connector surface in defense industry, screen printing in general industry, transfer printing pre-processing and so on.
Low maintenance cost, easy for customer to control cost
Low maintenance cost, easy for customer to control cost
Microwave power supply / intermediate frequency power supply are optional
Self-made key component of microwave power supply, highly cost-effective
Air source : Compressed air (CDA)
Equipment Parameters
Self-made key component of microwave power supply, highly cost-effective
Air source : Compressed air (CDA)
Equipment Parameters
|
Name |
Direct injection/Rotary spraying plasma cleaning machine |
|
Model |
PLASMA-R20/50/60 |
|
Power supply |
AC220V，50Hz |
|
Power |
400/600 25KHZ |
|
Processing height |
1-15mm |
|
Gas |
Compressed Air(0.4MPa) |
Equipment specification
|
Plasma control panel specification |
Size（WxDxH） |
443mmx425mmx163mm |
|
|
Weight |
15kg |
|
|
|
Power demand |
AC220V,50-60Hz, 3-wire , Single phase + ground wire 16A |
Ground wire<0.5Ω |
|
|
Plasma power output |
400/600/1000W |
The available power depends on the actual conditions |
|
|
I/O-intake joint |
5x8mm |
connected to the main air supply |
|
|
Gas consumption |
CDA：24±2L/min |
Depends on actual conditions and samples |
|
|
Intake pressure |
4.6±0.8kg/cm² |
|
|
|
Working environment |
Place in a well ventilated place (the ambient temperature is less than 30 ℃). The space of more than 150 mm heat dissipation on the left and right and above is reserved, and the line space of 120 mm in the rear is reserved |
|
|
|
|
|
|
|
|
Plasma head specification |
Size |
330x153x85mm |
|
|
Weight |
<4kg |
|
|
|
Power - plasma head cable distance |
3m |
|
|
|
|
|
|
|
|
Other specification |
Effective cleaning range |
20-100mm |
Plasma head is optional |
|
Processing speed |
30-300mm/sec |
Depend on the samples |
|
|
Processing distance |
1-15mm away from the subject to be cleaned |
Depend on the samples |
Sample
