How to mark acrylic by laser
Release time：2021.12.24
Views：3344Acrylic materials are widely used. They are cheap and have good laser absorption rate. They can be used to make all kinds of products, including all kinds of signs, gifts
and prizes.
Most people usually choose transparent acrylic because it is very popular and easy to use. This transparent acrylic is usually mark with CO2 laser, which is determined
based on the characteristics of light. The wavelength of CO2 laser is 9.2-10.8 μ m.
The effect of acrylic laser marking is the best at low power and high speed. If your acrylic material has a coating or other additives, please increase the power by 10%, but
keep the speed of use on unpainted acrylic. This provides more energy for the laser to mark the paint. The materials discussed will determine the ideal frequency setting
for your laser. However, if cast acrylic is used, you can mark at a high frequency of 10000 – 20000 Hz, and if extruded acrylic is used, you may want to mark with a lower
frequency of 2000 – 5000 Hz.
and prizes.
Most people usually choose transparent acrylic because it is very popular and easy to use. This transparent acrylic is usually mark with CO2 laser, which is determined
based on the characteristics of light. The wavelength of CO2 laser is 9.2-10.8 μ m.
The effect of acrylic laser marking is the best at low power and high speed. If your acrylic material has a coating or other additives, please increase the power by 10%, but
keep the speed of use on unpainted acrylic. This provides more energy for the laser to mark the paint. The materials discussed will determine the ideal frequency setting
for your laser. However, if cast acrylic is used, you can mark at a high frequency of 10000 – 20000 Hz, and if extruded acrylic is used, you may want to mark with a lower
frequency of 2000 – 5000 Hz.
